Command Consoles - Netcom EX - Enclosed LAN Furniture - Command Console Furniture - Command Centre Furniture - Bridge Furniture
Command Centre Console Furniture - Netcom EX
 Netcom EX Brochure (3.40Mb)
|
Netcom EX, EDP's command centre console furniture, provides centralised access to all computer and telecom operations. This enclosed LAN furniture creates an impressive working environment that showcases your command centre.
|
|
Features
- Fully modular system. Units can be configured in single, double or triple levels, making it expandable both horizontally and vertically.
- Units are available in 25"(635mm), 48"(1219mm), and 72"(1829mm) widths.
- Corner units are available in three angles 22º, 45º and -45º, therefore giving you the flexibility to create virtually any configuration.
- Netcom EX command consoles are designed to maximize natural airflow. For added ventilation, fans can be added to extract air or increase air coming into the units.
- This enclosed LAN furniture is accessible from both the front and rear. The front via monitor and server doors, the rear by drop down panels. Monitor doors are either tinted or optical coated, non-glare glass.
- As with all Netcom Furniture, close attention is paid to cable management.
- Large screen monitors, up to 42", can be stored in the specially designed second level Large Screen Unit.
Specifications
- Netcom EX command consoles are constructed from 18 gauge steel. Top, rear and side panels are reinforced with stiffeners.
- Worksurfaces are 1¼" (32mm) thick, and are made from laminated pressboard.
- Shelves are adjustable in .¼" (6mm) increments, and can be angled.
- Shelves can support 1000 lbs (454Kg).
- Netcom EX's design is such that all monitors can be viewed vertically. The first level is tilted back 10º. The second and third levels are tilted forward by 10º.
- Keyboards are stored in keyboard trays located under the worksurfaces
- Netcom EX also features both horizontal and vertical cable management, allowing inconspicuous routing of wires and cables. Unit to unit cabling is accomplished via pre-punched cable channels in the side of the units.
- Additional monitors can be stored below the worksurface by using the Viewport option.
|
Divisions of EDP |
 |
 |
