New Environmental Monitoring Device from Uptime Devices

EDP Europe are pleased to announce the introduction of a new Environmental Monitor from Uptime Devices, the RPM.

The Remote Physical Monitor (RPM) is the new standard in physical and environmental monitoring with devices designed to monitor temperature, humidity, airflow, water, voltage, current, motion, smoke and contact closures. When conditions exceed user-defined limits personnel are notified.

The RPM relies on new Remote Intelligent Multi Sensors (RIMS), that not only make environmental and security readings but can store those readings as well. The RPM has four sensor ports that allow up to 16 RIMS to be daisy-chained up to 1,000ft from each port. RIMS are available for Temperature / Humidity / Airflow / Dry Contact, Voltage, 10 Port Dry Contact and RS232. The Voltage RIMS are 2 port and can be used to power on / off / reboot the attached equipment.

The RPM supports SNMP, DHCP, SNTP, PoE and SMS via an external SMS Modem (not supplied) connected to the serial port on the RPM. There are four user-defineable thresholds, full password protection and an LCD screen that makes critical information available at a glance.

For more information click here