PowerPAL - Dial-up Power Controller

PowerPAL, from Dataprobe, uses a dial telephone line to remotely control A/C power. The user can turn power ON, OFF or Power Cycle (Reboot) by entering DTMF digits using an ordinary tone dial phone. The phone line connected to the PowerPAL can also be used by other equipment in a normal manner after control of power. With one phone call, you can power up, down or reboot equipment then ring the telephone device connected to PowerPAL’s Extension port.

PowerPAL works by listening for dialing tones (DTMF) after it answers a call. If these tones are heard, PowerPAL will respond with the current power status and allow additional tones to control the power. Once power control is completed, the device on PowerPAL’s Extension may be rung.

Four call answering modes, security features and power control options make PowerPAL both easy to use and very flexible. An On / Off / Auto switch on PowerPAL allows local manual control.