KoldLok - Raised-Floor Grommets - Effective Data Centre Cooling - Stopping Cold Air Loss - Sealing Cutouts in Raised-Floors - Perforated Floors - Cable Cutouts
KoldLok Surface Mount Raised-Floor Grommets
For The Data Centre Environment
 Surface Mount Data Sheet (126Kb)
|
The Surface Mount raised-floor grommet is designed to fit in active raised-floors to seal cable openings without affecting operations. The Surface Mount unit pulls apart into two halves and is then positioned around the cables.
By sealing cable cutouts you can drastically improve the cooling capacity within the data centre.
|
|
Features
- The Surface Mount is inherently self-sealing, using multi-layered, different sized filaments which interweave and overlap.
- The fibres are cantilevered, so forcing them to close.
- There are over 3,000 filaments per cross sectional inch.
- The filaments safely dissipate any static build up off the cables that are pulled through.
- All metal components within the gommets are anodized to resist corrosion.
- Units are easily installed. Half of the unit is stuck to the floor tile using a double-sided adhesive seal, which provides a strong bond and prevents the grommet from coming loose. The other half has a single-sided adhesive seal which prevents air escaping. This half can be removed to allow access to the cables.
- Overall dimension are: 11" x 8¼" x 1⅛" (279mm x 210mm x 29mm)
- Designed for 9" x 6" (229mm x 152mm) cutouts
- Usable Opening - 8" x 4" (203mm x 102mm)
|
Divisions of EDP |
 |
 |
