The Fujikura 70R Plus is a robust ribbon fusion splicer designed for splicing ribbon optical fibre, with new features that enhance connectivity, usability and performance. The design streamlines the steps required to complete the splices enabling better productivity.
The configurable automated features of the Fujikura 70R+ ribbon fusion splicer enables the machine to be customised to best suit your fibre splicing technique.
The programmable automatic wind protector closes and starts the splicing process after securely clamping the fibres in position. Once the splice is completed the wind protector automatically opens and enables the fibres to be quickly and easily removed. Similarly, the clamshell design of the tube heater clamps the splice protection sleeve and applies heat from both sides. The improved design of both the wind protector and tube heater help deliver splicing in 11 seconds and tube heating in 18 seconds.
The Fujikura 70R Plus ribbon fusion splicer has a rugged construction which improves reliability by resisting shock, rain and dust, allowing it to withstand a 76cm (30 inch) drop test. The unit also features a high-resolution LCD monitor, powerful Li-ion battery for longer operation time and built in videos for on-the-go training. The Fujikura 70R+ also benefits from wireless Bluetooth® communication that enables heat data to be communicated to Smartphones or other Fujikura Bluetooth® equipment such as the Fujikura RS02/RS03 ribbon fibre strippers.
| Applicable fibres | SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655) |
|---|---|
| Fibre count | Single to 12 |
| Cladding dia. / Sheath dia. | Single: 125μm / 160μm to 3mm by fibre holder system Ribbon: 125um / Ribbon fibre thickness 0.25 to 0.4mm |
| Cleave length | 10mm to 13mm |
| Splice mode / heating mode | Total 100 splice modes / 30 heating modes |
| Typical splice loss | 0.05dB (SM), 0.02dB (MM), 0.08dB (DS) and 0.08dB (NZDS) Measured by cut-back method relevant to ITU-T and IEC standards |
| Return loss | >>60dB |
| Typical Splice time / Typical tube heating time | 11sec with SM FAST, 15sec with SM AUTO / 18sec with FP-04(T) sleeve |
| Splice result storage | Last 2,000 splices |
| Viewing methods / magnification | 2 axis CMOS camera with 4.73” colour LCD. X / Y (35 – 90X magnification, automatically change depending on fibre count), or both X and Y simultaneously |
| Tension test | 1.96 to 2.25N |
| Applicable protection sleeve | 60mm, 40mm and Fujikura micro sleeves |
| No. of splice / heating per battery full charge *1 | Typical 110 cycles with BTR-09 |
| Electrode life | 1,500 splices |
| Wireless connectivity | Wireless technical standard: Bluetooth®4.1 LE*3 OS: Android 5.0 or above, iOS: 8.0 or above (iPhone above) |
| Size / weight | 146W x 159D x 150H (mm) / 2.5kg (including battery) |
| Operating condition | Altitude: 0 to 3,660m above sea level, Wind: 15m/sec Temperature: -10 to 50deg C, Humidity: 0 to 95%RH, non-dew |
| Resistance tests*2 | Shock : 76cm (30inch) all surface drop Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X Rain : H=10mm/hr for 10min, IPX2 |
| Other features | PC software upgrade / data management |
| Terminals | USB 2.0 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for RS02 or RS03 power supply. |
*1: One (1) splicing and heating cycle per two (2) minutes under room temperature condition.
*2: Carried out in Fujikura labs in Japan. The shock, dust and rain resistance test do not guarantee the product will not be damaged under these conditions.
*3: The Bluetooth® wireless connection of this product is not guaranteed to work with all Smartphones or other devices.
Quote Cart
