Hubbell PROclick Fibre Connectors

Hubbell PROclick Fibre Connectors

Hubbell PROclick

Pre-polished SC & LC Fibre Connectors

Hubbell PROclick® Fibre Connectors are pre-polished SC and LC fibre connectors that can be terminated in less than 60 seconds to cleaved fibre cables.

Product Description

Hubbell PROclick Fibre Connectors a quick & easy field termination solution

Hubbell PROclick Fibre Connectors provide a quick and easy way to field terminate fibre optic cables without the need of adhesives and polishing. PROclick Fibre Connectors are pre-polished SC and LC connectors that can be installed on to cleaved fibres in less than 60 seconds to produce a secure, low-loss fibre connection. They are an ideal solution for installing new fibre connections, and perfect for repairing existing damaged connections.

PROclick SC and LC fibre connectors feature an index-matching splice mechanism and a precision factory pre-polished zirconia ceramic ferrule. A micron-precision fibre alignment mechanism and smooth fibre feed ensure a low loss, high yield termination to cleaved fibres. PROclick support OM1, OM2, OM3, OM4 and SM fibre types and use a proven fibre clamping method that performs under extreme temperatures specified in Telcordia GR-326 standards.

Installing PROclick Fibre Connectors
Terminating the PROclick can be completed in less than 60 seconds. Simply insert the cleaved fibre into the connector and hold in place. Remove the wedge clip from the PROclick to close the fibre clamp. After termination use a Visual Fault Locator (VFL) to confirm and assure optimum fibre mating within the splice element.

Features & Benefits

  • Precision low-loss, factory polished connector with integral splice and fibre clamp.
  • Simple and fast connector termination, with no adhesives or field polishing required.
  • Precision factory polished PC, UPC or APC ferrule.
  • UL-94-V0 housing colour coded for all fibre types.
  • Fibres supported: OM1, OM2, OM3, OM4, SM.
  • Compatible with 900 micron or 250 micron buffer with break-out tubing.
  • Provisions for visual light source verification to achieve optimal splice transmission.
  • Wide operating temperature range for thermally stable optical performance.
  • Meets a wide range of standards and verifications including: TIA-568-C.3 performance requirements, Telcordia GR-326 end face geometry, Telcordia GR-326 service life tests and IEC61754-20 and TIA-604-10 intermateability.

Applications Supported

  • 10GbE Multi Mode and Single Mode optical networks.
  • Intra-building backbone and horizontal fibre interconnections.
  • Inter-building OSP entrance terminations.
  • Data Centre and WAN main cross-connect terminations.
  • Quick deployment remote data links.
  • Fibre to the Subscriber (FTTX).
  • Low reflection angle polish Single Mode Applications


  • Insertion loss: 0.5dB Typ, 0.75dB max.
  • Single Mode return loss: 55dB Typ, 40dB min.
  • Multi Mode return loss: 35dB Typ, 22dB min.
  • Operating temperature range: -40ºC to +75ºC.
  • Mating durability: 500 cycles <0.1 dB change.
  • Zirconia ferrule:
    • LC: 1.5mm PC or UPC polish
    • SC: 2.5mm PC, UPC or APC polish
  • OM3 connectors are compatible with all OM4 applications.


PROclick Installation
This video shows how to install the Hubbell PROclick connector.


EDP Hubbell PROclick Connectors Data Sheet
EDP Product Brochure

Go to Top