WireXpert 4500 Network Cable Certifier

WireXpert 4500 Network Cable Certifier

WireXpert 4500 Network Cable Certifier

The WireXpert 4500 network cable certifier provides cable certification testing up to Class FA and CAT8 copper cabling, as well as MPO/MTP, SM, MM and MMEF fibre optic cabling, Coax and M12 industrial Ethernet cable. With the WireXpert 4500 cable installers can make significant gains in productivity with the WireXpert’s industry leading test speeds and ease of use. This WireXpert network cable certfier is ready for 40G and beyond.

Product Description

High Performance Network Cable Certifier

The WireXpert 4500 is a high performance network cable certifier that provides certification testing up to Class FA and capable of testing the latest Class I & II CAT8 copper cabling systems. Comprising of a Local and Remote unit the WireXpert 4500 sets new standards for user friendliness thanks to its large touchscreen graphical interface, and this network cable certifier is geared up for certifying beyond the widest frequency range of 1 – 2,500MHz.

The Dual Control System (DCS™) on the Local and Remote units makes it really easy to operate test cycles, whether it is co-ordinated by two technicians or only one and keeps walking time between outlets to a minimum. The intuitive navigation between the screens of the device makes it easy to use and when connected through the PC software export generates professional reports.

The WireXpert 4500 has been extensively tested and approved by the leading cable manufacturers and approved for both field and laboratory testing. Testing kits are available for Single Mode, Multi Mode, Class FA, and MPO/MTP®.

Features

  • First cable certification up to 2,500MHz to support new TIA CAT8 and ISO Class I and II draft standard.
  • Most advanced cable certification for all standards: Class D/E/EA/FA, Category 5e/6/6A, and the new draft CAT8 as well as ISO draft standards Class I and Class II.
  • Accuracy independently verified by ETL.
  • Exceeds ISO Level V, IV and TIA Level IIIe Accuracy requirements.
  • Endorsed by companies worldwide.
  • Many measuring modules available e.g. patch cord testing, Industrial Ethernet, Class FA.
  • Perform extended fibre certification for 850/1,300nm MM and 1,310/1,550nm SM fibre.
  • Advanced reporting and documentation.
  • The only certifier supporting all data centre, premise cabling and industrial Ethernet requirements.

Technical Specifications

Copper Testing

Certification testingTIA 568-C.2.1 CAT5e, 6, 6A, draft CAT8 ISO/IEC 11801, EN 50173 Class D, E, EA, F, FA
Draft Class I and Class II Permanent link and channel
CAT5e, 6, 6A, 7, 7A and patch cord
Max cable length for dual-ended Autotest500m
Insertion cyclesChannel: 10,000 typical, Permanent link: 5,000 typical
Test ParametersAs specified in TIA 1152, IEC 61935-1
Wiremap
Loop Resistance0 to 40Ω, ±0.1Ω
Length0 to 500m, ±0.5m (dual-ended testing)
Propagation Delay and Delay Skew0 to 5000ns, ±1ns
Attenuation0 to 70dB, ±0.1dB
Pair-to-Pair and Power-Sum NEXT0 to 85dB, ±0.2dB
Pair-to-Pair and Power-Sum ACRF0 to 85dB, ±0.2dB
Return Loss0 to 40dB, ±0.2dB
ACRN, PSACRN0 to 85dB, ±0.5dB
Advanced diagnosticsTime-domain fault Locator for RL and NEXT
Measurement accuracyExceeds TIA 1152 Level IIIe, IEC 61935 level IV, draft level V
Measurement frequency range1- 2,500MHz

Fibre Testing – SM

Wavelengths1310nm, 1550nm
Autotest time6 seconds for dual ended test
Connector typeSC, LC (optional adapter needed)
Test standardTIA 568 C.3, IEC 14763-3
Test Parameters
Loss0 to 31dB, ±0.2dB
Length0 to 20,000m, ±1.5m
Output power-5dBm to -9dBm
Receiver sensitivity-40dBm

Fibre Testing – MM / MMEF

Wavelengths850nm, 1300nm
Autotest time6 seconds for dual ended test
Connector typeSC / FC-SC
Test standardTIA 568 C.3, IEC 14763-3
Test Parameters
Loss0 to 24dB, ±0.2dB
Length0 to 2,000m, ±1.5m
Dynamic range24dB / 12dB
Output power-4dBm to -10dBm / -16dBm to -20dBm
Receiver sensitivity-34dBm / -40dB
Encircled-Flux (EF) complianceIEC 61280-4-1 (MMEF)
VFL wavelength650µm (MMEF)
Power0dBm (MMEF)

General Specifications

InterfacesProbe Interface, RJ45 Ethernet, USB host and device, talkset, power jack
Display5” industrial LCD, touch sensitive area on both units
EnclosureRuggedised plastic with rubber over-mould, withstands 1.5m drop test on hard surface
Remote unit abilitiesView test results, save tests, start autotest
Power supplyAC 100-240V to 12V, 3A power adapter
Input over-voltage protectionProtected against Telco voltages
BatteryRemovable and rechargeable Li-Ion
Battery capacity>8 hours continuous operation
Internal storage capacity2000 copper test results with full plot information
External storageUSB Flash Drive
Dimensions232 X 126 X 87mm (8.7 X 4.3 X 2.1 inch)
WeightApprox. 1.4kg (3lb) / unit
Supported languagestw, cs, en, fi, fr, de, it, ja, ko, pl, pt, ru, es, sv, tr
Calibration period1 year

Environmental

Operating temperature0° to 40°C
Storage temperature-20° to 60°C
Relative humidity10% to 80%

Downloads

WireXpert 4500 Network Cable Certifier Data Sheet
EDP Product Brochure

Videos