iSensor Server Room Environmental Monitoring Controller

iSensor Server Room Environmental Monitoring Controller

iSensor

Data centre and server room environmental monitoring system

iSensor is a dual powered 1RU rack-mountable device that delivers a data centre and server room environmental monitoring system, capable of monitoring up to 24 iSensorPlus Temperature & Humidity sensors. Via optional environmental sensors the iSensor environmental monitoring system can also monitor dust particles and volt free contacts. Access can be through web browser via the internal webserver or integrated into a remote management platform (NMS, BMS, DCIM etc.) using SNMP.

Product Description

iSensor Monitoring Solution

A data centre temperature monitor and humidity monitoring solution

iSensor is a cost-effective, out-of-the-box data centre temperature monitor and humidity monitoring solution which provides a proactive solution for monitoring the environment in data centres and server rooms.

The dual-powered iSensor Controller unit features 24 iSensorPlus sensor ports into which installs a combined temperature monitor and humidity monitor. These 24 temperature and humidity sensors are included and connect to the controller unit via standard CAT5/6 network Ethernet cabling. This enables each of the sensors to be a maximum distance of 100m away from the iSensor controller box. Optional environmental sensors are also available to monitor particles and dry contacts.

The iSensor controller is connected to your network and the on-board webserver accessed via web browser, it can also be monitored through SNMP registers. Like the iAccess cabinet door security system, both are stand-alone systems that utilise the same webserver software so provide a familiar solution. Centralised management of both iAccess and iSensor is possible through any SNMP enabled remote management platform be it a NMS, BMS or DCIM system such as Sensorium. In the individual rack view within Sensorium it’s possible to access data from both systems along with any other SNMP enabled equipment within the rack such as PDUs.

Each iSensorPlus sensor can be individually configured to the environment they are monitoring with high and low thresholds set for both temperature and humidity. Alerts can then be sent via SNMP traps with e-mail event notification possible when thresholds are breached or contact status changes.

Dust monitor and other environmental sensors

As well as providing temperature and humidity environmental sensors, iSensor also offers an optional dust monitor sensor. Using the particle dust sensor, iSensor can then also monitor the data centre or server room environment for dust particles. iSensor can also monitor dry contacts via the optional Volt Free Contact sensors for monitoring and alerting on status changes.

Features & Benefits

  • 24 iSensorPlus sensors – Each controller provides 24 iSensorPlus ports for connecting Temperature & Humidity sensors for deployment across the data centre utilising standard CAT5/6 cabling (to a maximum distance of 100m).
  • High/Low Alarm thresholds for Temperature and Humidity – Option to set individual High and Low Alarms for both Temperature and Humidity on each sensor.
  • Monitoring/configuration via web browser and/or SNMP – Monitoring of the iSensor Controller is possible over an Ethernet network via an internal web server, and SNMP registers.
  • E-mail notification – Event notification through SNMP Traps are generated when thresholds are breached or contact status changes.
  • SNMP Traps – Event notification through SNMP Traps are generated when thresholds are breached or contact status changes.
  • Optional Particle Sensors – Particle Sensors enable the monitoring of dust particles in the data centre environment.
  • Optional Volt Free Contact Sensors – Optional Volt Free Contact sensors are available for monitoring and alerting of status changes.

Specifications

  • 24 x iSensorPlus Temperature/Humidity sensors included.
  • Optional sensors – Particle and VFC.
  • Network 10/100Mbps (Auto).
  • Configuration/monitoring options – Internal website and SNMP.
  • Power – Dual 240V IEC C13 (Max 0.5A).
  • LED – Power supply (A & B), Ethernet, iSensorPlus Sensor status.
  • Dimensions – 1RU x 155mm depth.
  • Weight – 1.2Kg

Downloads

EDP iSensor Controller Data Sheet
EDP Product Brochure