Jacarta interSeptor Pro Environmental Monitor

Jacarta interSeptor Pro Environmental Monitor

Jacarta interSeptor Pro

Environmental Monitoring and Alert System for Data Centres and Racks

The Jacarta interSeptor Pro environmental monitor providing an advanced, yet uncomplicated environmental monitoring solution for the data centre and computer room provide an early warning notification when thresholds are exceeded. The Jacarta interSeptor Pro environmental monitor is available in three models, equipped with 8, 16 or 24 environmental ports. Each port can monitor a temperature and humidity probe, off of which can be attached a further two alarm sensors.

Product Description

Jacarta interSeptor Pro

Using an Environmental Monitor can help prevent Data Centre disasters

Crucial to any business continuity strategy is the implementation of an effective environmental monitoring and alerting system. Air-conditioning failure, water ingress, fire, power failures and physical security breaches are just a few of the many potential problems that seriously threaten the integrity of network hardware and data.

The Jacarta interSeptor Pro environmental monitor provides an advanced, yet uncomplicated environmental monitoring solution for the data centre and computer room providing an early warning notification when thresholds are exceeded. The Jacarta interSeptor Pro environmental monitor is available in three models, equipped with 8, 16 or 24 environmental ports. Each port can monitor a temperature and humidity probe, off of which can be attached a further two alarm sensors.

The design of the Jacarta interSeptor Pro environmental monitor provides superb scalability and flexibility.

Features & Benefits

  • Supports up to 24 temperature / humidity Sensors.
  • Supports up to 48 Additional Environmental Alarm Sensors.
  • Voice, SMS, Email and SNMP Alerts.
  • Web Browser Interface.
  • 3 versions: 8-port, 16-port, 24-port.
  • Remote temperature/humidity monitoring across Ethernet network (all temperature/humidity sensors supplied).
  • Provision to connect up to 48 optional Go-Probe sensors (water, smoke, security, power, etc.).
  • Monitoring via web browser, Telnet and SNMP network management system.
  • Email and SNMP Alerts.
  • SMS Alerts via optional GSM Modem.
  • Automated voice and SMS alerts with escalation procedure and alarm acknowledgement via Jacarta Alert Centre (optional).
  • Alarm Schedule facility to enable alerts to be sent only when required.
  • Extensive on-board data logging and graphing.
  • Relay outputs for automated crisis management.
  • 8-port interSeptor Pro can also be supplied with 2, 4 or 6 temperature / humidity probes.

Sensors

Jacarta Temperature & Humidity Sensor

Temperature & Humidity Sensor

Each interSeptor is supplied with the required number of temperature / humidity sensors for the version purchased. i.e. 8, 16 or 24. Two optional Go-Probe sensors can also be connected to each temperature / humidity probe from the range of sensors detailed below. High / low warning and critical alarm thresholds can be easily configured via the interSeptor Pro’s web browser interface.

Jacarta Water Detector Sensor

Water Detector Sensor

The Jacarta interSeptor Pro water detector uses an advanced leak detection cable to sense the presence of water along its length. The water detector can be supplied with either 3 or 18m of sensor cable and 4m of interface cable.

Jacarta Security Sensor

Security Sensor

The Jacarta interSeptor Pro Security Sensor is a magnetic reed switch that can be used to detect the opening of doors, racks, windows and cupboards.

Jacarta Smoke Detector

Smoke Detector

The Jacarta interSeptor Pro Smoke Detector is a mains powered, ionisation based smoke detection unit that can be positioned to monitor for early signs of fire, providing both an interSeptor alarm and an audible alarm upon detection. This sensor is provided with either a 4 or 18m interface cable.

Jacart Voltage Sensor

Voltage Sensor

The Jacarta interSeptor Pro Voltage Sensor can be used to monitor spare power outlets for outages and interruptions. As soon as power to the outlet is lost the interSeptor will provide an alarm. This sensor is provided with either a 4 or 18m interface cable.

Alternative cable lengths are available with all Jacarta Go-Probe sensors if required.

Downloads

Jacarta interSeptor Pro Data Sheet
EDP Product Brochure

Go to Top