Name: Dataprobe iBoot G2 / G2+ remote power control
SKU: 1575
Availability: InStock

Dataprobe iBoot G2 & iBoot G2+ Single Outlet PDU

More About This Product

The Dataprobe iBoot G2 and G2+ offers remote power control of attached equipment, reducing the need to visit site to recycle the power of the attached equipment.

Add to quote

SKU: N/ACategories: Intelligent PDUs, Power & Monitoring, Power Distribution

Dataprobe iBoot G2 and G2+

Being able to remotely manage power to IT devices can keep your critical systems running without the cost of service call outs or downtime. The Dataprobe iBoot G2 and iBoot G2+ offers remote power control to the attached equipment without the need to visit site, and greatly reduces any potential downtime.

The Dataprobe iBoot G2 and iBoot G2+ are accessed over IP using a standard web browser. Simply point your browser to the unit’s IP address, login and you’re one click away from being able to re-power the attached equipment.

Features & Benefits

Dataprobe iBoot G2

Dataprobe iBoot G2 is a single outlet network power switch that provides remote power control through a standard web browser from anywhere, anytime. The iBoot G2 can also be configured to automatically reboot the power on crashed systems.

Web browser power control: Connect to the unit’s IP address, login and you can power on, off or set a timed reboot.
A/C and D/C versions: Standard IEC320 connection that is auto sensing for worldwide use (105-240VAC). D/C version is auto sensing for 5-48VDC and switches up to 10 Amps (up to 30VDC) and 2 Amps (30VDC and higher).
10/100 Network connection.
Telnet control; Command Line Interface (CLI).
Dual AutoPing with logical AND / OR setup: AutoPing allows the iBoot G2 to monitor any IP device on the network and take automatic action whenever the device is down.
Real time event scheduling.
Software developer tools.
Wall and DIN rail mounting.

Dataprobe iBoot G2+

Dataprobe iBoot G2+ expands on the features and capabilities of the iBoot G2, by providing two expansion I/O ports that can be used in a variety of ways along with other additional features:

Expansion to independent control of three outlets: Allows two additional iBoot EXP expansion units to be added.
General purpose I/O independently monitored and controlled.
Heartbeat monitor – Automatic failure detection: Like AutoPing the Heartbeat monitor allows the iBoot G2+ to monitor one or more devices and take action when a network message fails to arrive after a set number of intervals.
USB port for direct PC communication for serial Command Line Interface access.