More About This Product
The AFL NOYES SMLP5-5 fibre optic test kit is a fibre network tester that can test both Single Mode or Multi-Mode fibre optic networks; and provides a rugged, lightweight, cost-effective and easy-to-use testing solution.
NOYES SMLP5-5 Fibre Optic Test Kit
Fibre network tester with Optical Power Meter & Optical Light Source
The NOYES SMLP5-5 fibre optic test kit, from AFL, combines the OPM5-2D Optical Power Meter with the OLS4 Optical Light Source that features integrated LED and Laser light sources enabling it to test both Single Mode and Multi-Mode fibre optic networks.
The OLS4 features 850/1300nm LED output from a Multi-Mode output port and 1310/1550nm Laser output from a Single Mode output port. Each wavelength may be transmitted individually at CW or with user selectable modulated tone (SM output). Each wavelength can also be transmitted with Wave ID. Wave ID saves time whilst increasing efficiency and reducing errors. It enables users to test two wavelengths at the same time reducing the test time by eliminating the need to test each wavelength separately. It automatically detects and sets received wavelengths eliminating loss measurement errors by automatically matching OPM to transmitted wavelength. Both output ports can be inspected and cleaned thanks to their UCI based removable adapters.
The OPM5-2D part of the NOYES SMLP5-5 test kit is a file management system that allows technicians to organise test results into multiple files and transfer stored result data via USB to a PC for analysing, generating reports and printing using the supplied TRM (Test Results Management) software.
Features & Benefits
Features & Benefits
- Wave ID reduces test time.
- Hand-held, rugged, lightweight.
- Cost-effective, easy-to-use.
- N.I.S.T traceable.
- OLS4 Quad Light Source.
- Dual or single Wave ID, CW, Tone.
- Industry standard 2 Khz test Tone.
- 50 μm and 62.5 μm mandrels.
- OPM5-2D Optical Power Meter.
- File management system organises stored test data.
- Storage capability >500 fibres.
- USB port for download of stored data.
- TRM™ PC Reporting Tool (Windows® Compatible).
- Apply certification rules to test results.
- Create professional test reports.
- Archive test results.
- Certify multimode and single-mode links per TIA/EIA standards.
- Fibre identification prior to splicing.
- Passive Optical Networks (PON) testing.
- Save test data for report generation with NOYES TRM Software.
Specifications
Specifications
OLS4 Light Source Specifications
| Optical | MM Optical Port | SM Optical Port | ||
|---|---|---|---|---|
| Wavelength (±20 nm) | 850 ±30 nm | 1300 +30/-20 nm | 1310 ±20 nm | 1550 ±20 nm |
| Emitter Type | LED | Laser | ||
| Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 | ||||
| Spectral Width | 45 nm (typ) | 120 nm (typ) | 5 nm (max) | |
| Output Power | >-20 dBm, 62.5 μm multimodea | 0 dBm, 9 μm single-mode | ||
| Output Stability | ±0.1 dB over 8 hours (after 5 min. warm-up) | ±0.05 dB over 1 hour (after 15 min. warm-up) ±0.1 dB over 8 hours (after 15 min. warm-up) | ||
| General | ||||
| Power | 2 x AA batteries, optional AC adapter | |||
| Battery Life | Typical 30 hours, minimum 20 hours | Typical 72 hours, minimum 40 hours | ||
| Available Adapters | SC FC, ST, LC | |||
| Operating Temperature | -10°C to 50°C, 90 % RH (non-condensing) | |||
| Storage Temperature | -30°C to 60°C, 90 % RH (non-condensing) | |||
| Size (H x W x D) | 14.0 x 8.1 x 3.8cm (5.5 x 3.2 x 1.5 in) | |||
| Weight | 0.29kg (0.65 lb) | |||
OPM5-2D Power Meter Specifications
| Optical | OPM5-2D |
|---|---|
| Calibrated Wavelengths | 850, 1300, 1310, 1490, 1550 nm |
| Detector Type | Germanium (Ge) |
| Measurement Range | +6 to -60 dBm |
| Tone Detect Range | +6 to -50 dBm +6 to -45 dBm for 850 nm |
| Wavelength ID Range | +6 to -50 dBm +6 to -45 dBm for 850 nm |
| Accuracy | ±0.1 dB (typival); ±0.25 dB |
| Resolution | 0.01 dB |
| Measurement Units | dB, dBm, μW |
| General | |
| Power | 2 x AA batteries, optional AC adapter |
| Battery Life | 300 hours |
| Operating Temperature | -10°C to 50°C, 90 % RH (non-condensing) |
| Storage Temperature | -30°C to 60°C, 90 % RH (non-condensing) |
| Size (H x W x D) | 14.0 x 8.1 x 3.8cm (5.5 x 3.2 x 1.5 in) |
| Weight | 0.26kg (0.58 lb) |
Notes: All specifications valid at 25°C unless otherwise specified.
a Output power will be approximately 3 dB less if a 50 μm mandrel-wrapped jumper is used instead of a 62.5 μm mandrel-wrapped jumper.
Part Numbers
Part Numbers
Each Contractor Series Kit ships with adapter caps for all included instruments, AA alkaline batteries, user guide, and carry case with room for optional cleaning supplies (see below). Fibre mandrels (50 micron and 62.5 micron) are included with CKSM-2 and CKM-2 kits.
When purchased separately, CSM1 power meters and CSS1 light sources ship with connector adapter, AA alkaline batteries, user guide, and carry case. Fibre mandrels (50 micron and 62.5 micron) are included with CSS1-MM units.
Test jumpers are required for operation (purchased separately). Test jumpers with a variety of connector styles and fibre types and adapter caps for most common connectors may be purchased from AFL.
Models and Configurations
| Model Number | Includes |
|---|---|
| CKS-3-cc (cc = FC or SC) | Single-Mode Test Kit. Available with FC or SC connectors adapters. |
| CKM-3 | Multimode Test Kit. Available with SC connector adapters. |
| CKSM-2 | Single-mode and Multimode Test kit. Available with SC connector adapters. |
| CSS1-SM-cc (c = FC, SC, ST, or LC) | Single-mode LASER Source. Available with FC, SC, ST, or LC connector adapters. |
| FJK-CSS1-SM-cc (c = FC, SC, ST, or LC) | Single-mode LASER Source. Available with FC, SC, ST, or LC connector adapters. |
| CSS1-MM | Multimode LED Source. Available with SC connector adapter. |
| CSM1-3-cc (cc = *) | InGaAs Detector for single-mode applications. |
| CSM1-4-cc (cc = *) | High Power InGaAs Detector for single-mode applications. |
* For CSM1 power meters, cc = FC, SC, ST, LC, 2.5 mm, 1.25 mm. Other connector styles are available; see accessories section.
CSS1-SM Single-mode Light Source Accessories
| Part Number | Description |
|---|---|
| 2900-50-0002MR | FC UCI connector adapter |
| 2900-50-0003MR | SC UCI connector adapter |
| 2900-50-0004MR | ST UCI connector adapter |
| 2900-50-0006MR | LC UCI connector adapter |
| 8800-00-0072PR | Universal flip-top dust cap for UCI outputs |
CSM1 Power Meter Adapter Caps
| Part Number | Description |
|---|---|
| 8800-00-0214 | 2.5mm Universal (accepts FC, SC, and ST ferrules) |
| 8800-00-0224 | 1.25mm Universal (accepts LC and MU ferrules) |
| 8800-00-0200 | FC |
| 8800-00-0209 | SC |
| 8800-00-0202 | ST |
| 8800-00-0225 | LC simplex/duplex |
| 8800-00-0221 | E-2000 |
| 8800-00-0219 | 2.5mm open Universal, Accepts SC duplex, OptiTap connector |
| 8800-00-0203 | SMA |
| 8800-00-0201 | D4 |
| 8800-00-0204 | Biconic |
