Server Lifter - Battery Operated

Server Lifter Features & Benefits Include:

• Dual speed elevation and descent
• Full operator protection, reducing the risk of injury and greater protection of staff (e.g. back injuries)
• Battery charge meter
• Soft grip bull bar handles
• Highly attractive design
• Greater protection for computer hardware during the installation process
• Capable of lifting weights up to 205kg
• Available from stock

Power Pack / Charger

2 x 12vDC, 7.2 Amps sealed for life, maintenance free battery pack with built in auto cut off 220/240/110 volt charger unit complete with battery life LED. This type of charger prevents the possibility of over charging the batteries and increases battery life. Direct drive power unit and motor housed within a protective moulded casing. Fitted on the lower mast for a low centre of gravity and improved stability. Charging time approximately 4 hours.

Controls

Ergonomically designed deadman type 12 Volts DC constant pressure sealed push button type control unit. Shatter resistant case, hand held or mountable in holster provided, double insulated cable. Holster can be locked to prevent unauthorised use. Two speed operation

Health & Safety

Basic guideline figures for manual handling operations involving lifting and lowering are set out in Figure 1. They assume that the load is readily grasped with both hands and that the operation takes place in reasonable working conditions with the handler in a stable body position. The guideline figures take into consideration the vertical and horizontal position of the hands as they move the load during the handling operation, as well as the height and reach of the individual handler. It will be apparent that the capability to lift or lower is reduced significantly if, for example, the load is held at arm’s length or the hands pass above shoulder height. Note: NO attempt should be made to interpret this diagram without first reading the accompanying text